Tested using Z-Suite 2.2.0.0
| PLA + | PLA Tough | ABS | HIPS | |
| Printing Temperature |
230°C | 255°C | 235°C | 235°C |
| Build Plate Temperature | 30°C | 30°C | 80°C | 80°C |
| Infill | 30% | 30% | 30% | 30% |
| Layer Height | 0.19mm | 0.19mm | 0.19mm | 0.19mm |
| Retraction | 1.5mm | 1.5mm | 1.5mm | 1.5mm |
| Layer Fan | 100% | 100% | Auto | Auto |
| Z-Suite > External Materials | Glass-type Filament | Glass-type Filament | ABS-type Filament | ABS-type Filament |