Skip to main content

Ultimaker 2

  • Updated

Tested using Cura 3.0.3

  PLA + PLA Tough ABS HIPS FLEX 98 Nylon 6 Nylon 12 
Print Temp 215°C  230°C  240°C  235°C  235°C  2 50°C  235°C 
Build Plate Temp 50-60°C 50-60°C 80°C 80°C 60°C 60°C 60°C
Infill 30% 30% 30% 30% 10% 30% 30%
Layer Height 0.15mm 0.15mm 0.15mm 0.15mm 0.10mm 0.20mm 0.20mm
Retraction 6.5mm 6.5mm 7.0mm 7.0mm --- 7.0mm 7.0mm
Layer Fan 100% 100% 20% 20% 70% 100% 100%
Printing Speed 60mm/sec 60mm/sec 55mm/sec 55mm/sec 40mm/sec 30mm/sec 30mm/sec
Wall Speed 50mm/sec 50mm/sec 40mm/sec 40mm/sec 20mm/sec 30mm/sec 30mm/sec
Adhesion RAFT RAFT BRIM BRIM --- RAFT RAFT