PLA+ is an improved version of PLA, suitable for replacing ABS in many aspects. Is one of the most popular materials used in desktop 3D printing. We use pure grade Ingeo™ certified resins to ensure the best printing results. Our filament has passed a defined set of tests performed by NatureWorks to ensure product quality. It provides great visual quality and has very low shrinkage and warp. Its high impact resistance is similar to that of ABS and is ideal for high resolution or fast printing. It has fast crystallization, which enables printing without the support and with very fine detail. Post-annealing in the range of 80-130°C can be used to promote crystallization and improve the heat deflection temperature of the 3D printed part.
Main application
Concept modeling, Educational projects, Design objects, Ideal for high resolution or fast printing.
Benefits
- Ideal ABS substitute for many tasks
- Very low shrinkage
Recommended printer settings
Print temperature | 200±5°C | |
Print bed temperature (first/later) | 50/45°C | |
Fans | On (Not on the first layer) | |
Closed Environment | Not required | |
Notes | N/A |
Physical properties
Diameter | 1.75 mm | 2.85 mm |
Tolerance | +/- 0.02 mm | +/- 0.03 mm |
Roundness Accuracy | 99% | |
Moisture Content | < 0.02% | |
Density | 1.24 g/cm 3 (ISO 1183/B) | |
Melt Mass-Flow Rate (MFR) (200ᵒC/21.6kg) | 8 g/10 min (ASTM D1238) | |
Tg | 55-60°C | |
PMT | 165-180°C |