This filament opens up a great deal of interesting shatter-resistant objects. You can make living hinges with it, and combine them with rigid plastics. Supports have to be clipped away with a knife. Its high interlayer adhesion prevents objects from easily breaking along the Z-axis. It also resists heat better than PLA. KODAK Flex 98 offers high performance and excellent printing processability.
Main application
Concept modeling, Educational projects, Design objects, Ideal for grips, toys, non-scratching and cushioned supports, very strong objects, novelty objects.
Benefits
- Make soft objects
- High abrasive resistance
- Very strong, hard-to-break objects
Recommended printer settings
| Print temperature | 225±5°C | |
| Print bed temperature (first/later) | 70°C | |
| Fans | Low/Off | |
| Closed Environment | Not required | |
| Notes | Print under 30mm/s w/o retraction or adhesives | |
Physical properties
| Diameter | 1.75 mm | 2.85 mm |
| Tolerance | +/- 0.02 mm | +/- 0.03 mm |
| Roundness Accuracy | 99% | |
| Moisture Content | < 0.02% | |
| Density | 1.16 g/cm 3 (ISO 1183/B) | |
| Hardness (5 sec) | 55 +/-3 Shore D (ASTM D2240) | |
| Tg | -36°C | |
| Tm | 181°C | |