KODAK 3D printing filaments are not only meant to be used with the KODAK Portrait 3D printer but also with any printer accepting open-source filaments, and that is why they're available in standard 1,75 or 2,85 mm diameter.
The spool uses standard measures to be compatible with almost every printer in the market.
 |
| A | 52 mm | 2.04 in |
| B | 200 mm | 7.87 in |
| C | 44 mm | 1.73 in |
| D* | 96 mm | 3.77 in |
| Weight** | 180±20 g | 6.35±0.7 oz |
* A bigger inner diameter to prevent the material from creating a memory in its shape.
** Without filament.