Dev Tools are a set of tools used for debugging and technical support.
Inside there are 4 different buttons:
Reset user preferences: Resets printers welcome Wizard, Language, Cloud connections and Volume settings.
Reset board UUID: Resets the printers board automatically.
This can be used if the printer does not read certain USB sticks, or if files are not displayed correctly.
It can also be used if issues arise during the calibration storing operations.
NOTE: the front USB port must be cleared of any plugged device before performing this operation.
The "OK" button can be pressed as soon as it is shown on the screen indicating the board has been reset.
Enable SSH: Enables Secure Shell connections, it must be enabled only for technical assistance purposes if required by KODAK's technical support crew.
Disable SSH: Disables Secure Shell connections, it must be enabled only for technical assistance purposes if required by KODAK's technical support crew.
For customer support and technical assistance please contact through our Help Center or at
support@smart3d.tech